Eclipse Combustion EGA4 - Manual (Page 38)

Instruction Manual MM850481 ed.01
8.5 Configuration Software
GasConfig software is a PC windows compatible program for configuring the EGA4 flue gas analyzers. You can change
all memory settings: displayed measurements pages, printed measurements layout, Alarms, Fuels coefficients,
measuring technical units, etc.
8.5.1 How operate using GasConfig
When you run GasConfig a 2 independent windows system will be displayed on the PC monitor.
The window on the left is a parameter icon list. This list show all possible parameters for measured (O
2
, CO, Tgas,
Draught, etc.) and calculated measures (CO
2
, Efficiency, etc.). Same of these can be not available in your instrument (it
depends by instrument model, installed cells, and options).
The window on the right is the program user interface. It is organized in function pages; you can select the page for
interesting parameters using the mouse.
A main menu bar allows you to load and save the configuration data, to change communication setting, for data transfer
from and to the analyzer.
WARNING
B EFORE CONFIGURATION DATA TRANSFER FROM AND TO YOUR PC, BE SURE TO HAVE SELECTED THE EGA4 UNIT USING THE
“INSTRUMENT” OPTION ON MAIN MENU BAR .
The available function pages are:
General
This page allows you to set the general parameters as engineering units, O
2
% reference
values, etc.
Pages You can set up to 6 different pages in your instrument to display up to 36 different
measured and calculated values.
Printer You can program the complete layout for report printing: header, measured parameters,
etc.
38