Eclipse Combustion EGA4 - Manual (Page 44)

Instruction Manual MM850481 ed.01
Press and maintain the [SETUP] key down; press the [ON/OFF] key.
The analyzer will switch on. A password input page will displayed. Insert the password code “0011” and press the
[ENTER] key. The following page will displayed:
SET-UP Pag.1
CLOCK
SERIAL PORT
ANALYSIS PAR.
P DECAY TIME
–
NEXT ESCAPE
Press the [NEXT] (F1) key to change menu page.
SET-UP Pag.2
PRINTER TEST
CLOCK TEST
–
NEXT ESCAPE
Use the [S] and [T] keys to move the cursor symbol to the desired option.
Press the [ENTER] key to enter in the option set-up page.
Switch the instrument off to exit from the configuration procedure
10.2.1 Clock
Select this option for date and time set-up. Verify that the current values are corrects because the analyzer use these
data for analysis storing.
CLOCK
Hour : 10
Minutes : 22
ESCAPE
–
DATE
Use the [S] and [T] keys to move the cursor symbol to the desired option.
Press the [ENTER] key to enter in the option set-up page.
Press [ESCAPE] (F2) to return to the previous menu.
Press [DATE] (F1) to change date.
DATE
Day : 10
Month : 22
Year : 1999
Type : EURO
ESCAPE
–
TIME
Use the [S] and [T] keys to move the cursor symbol to the desired option.
Press the [ENTER] key to set a new date or date format (European or USA).
Press [ESCAPE] (F2) to return to the previous menu.
Press [TIME] (F1) to change time.
10.2.2 Serial Port
Selecting this option, you can set the baud rate and the ID number for instrument in infrared serial communication.
44