Panasonic KX-TG2670N - Manual (Page 60)

Pager Call
Storing Your Home Telephone Number
After storing your home telephone number, it will then be displayed on
your pager when your family wants you to call home. (See useful
information on page 61.)
1
2
3
4
8
Press IFUNCTION/CHI.
Press ® or ® repeatedly until the arrow
points to “Program”.
Press ® (Yes key).
►Program
Calling pager
TA ►=Yes
►Save DIRECT#
Set flash time
TA ►^Yes
Press ® or ® repeatedly until the arrow
points to "
tad program”.
Set dial mode
►TAD program
TA ►^Yes
Press ® (Yes key).
•The base unit display shows programming
options.
Answering
system setting.
See base unit.
Press d).
Base unit display
Enter home no.:
Enter your home telephone number up to 11 digits,
•The entered number is displayed on the base unit.
•If you misdial, press [CLEAR) and enter the correct number.
Press ® (Save key).
•A beep sounds. ___
•To return to the standby mode, press (OF0.
•Your pager will also display your home number if the unit receives a call from an
area which does not provide the Caller ID service or the caller requests not to
show their information. Please call home to check who alerted your pager.
60