Panasonic KX-TG2670N - Manual (Page 43)

8
To turn the call group feature on, select
“On” by pressing @ or
If not required, select “off”.
■When “On” is selected, the display will light in
orange and a different ringer pattern will be
heard. When “Off” is selected, an ordinary
ringer pattern will be heard.
Press ® (Next key).
•If you want to change the storing name,
number or group setting, press ® (Edit key)
repeatedly to reach the desired display and
change it.
Set group
:On
4^ T=Next
QP
Tom Jones
0987654321
A=Edit ►=Save
Press (Save key).
•A beep sounds.
•To continue storing other items, repeat from
step 2. _____
•To return to the standby mode, press (OFF],
Tom Jones
0987654321
•If a pause is required for dialing, (REDIAL/PAUSEl can be stored in a phone
number in step 5. This counts as one digit (p, 52). _____
•You can exit the programming mode any time by pressing |
6
^F |.
•If the display shows “Directory full” in step 2, press (OFF). To erase other
stored items from the directory, see page 49.
•After the maximum of 90 items has been stored, “Directory full" is also
displayed.
•If 3 beeps sound and the display shows “Save error", move closer to the base
unit and start again from step 1.
43