Panasonic KX-TG2670N - Manual (Page 15)

Programmable Functions
You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode initially.
Press iFUNCTION/CHl.
V
*
►Save directory-
Ringer volume ■
Program
Calling pager -
■ To store an item in the directory {p. 42).
To select the ringer volume (p. 17).
- To dial the stored pager number (p. 61).
Press 0-
V
*
►Save DIRECT#...
Set flash time.
Set line mode...
Talk switching-
Set dial mode..
TAD program....
To store a phone number in the DIRECT button
(p. 40).
■ To select the flash time (p. 53).
To select the line mode (p. 14).
To set the auto talk feature {p. 16).
To select the dial mode (p. 13).
To program answering system functions (p. 20).
During programming:
‘To select a desired function item, press ® or ® repeatedly until the
arrow points to the item. Then press 0 to go to the next step.
•You can exit the programming mode any time by pressing [OFF],
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base. Place on cradle and try again is displayed.
15