Panasonic KX-TG2670N - Manual (Page 17)

Selecting the Ringer Volume
You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring.
Handset ringer volume
Make sure the unit is in the standby mode initially.
Press [FUNCTlON/cFi]. 1
2 Press ® or ® repeatedly until the
arrow points to “Ringer volume”,
and press ® (Yes key).
Press ® or ® to select the HIGH
desired volume.
•The selected volume is displayed and rings.
•To turn the ringer OFF, press and
hold ® until 2 beeps sound.
To turn the ringer ON, press ® or ®
in step 3.
•The ringer will sound at the LOW level.
LOW
OFF
•You can also select the ringer volume while a
call is being received. Press ® or ® while
the unit is ringing.
•When set to OFF, “Ringer off” will flash for about 45 seconds before the
handset returns to the standby mode.
Base unit ringer volume
Make sure the unit is in the standby mode
initially. (You can also select the ringer
volume while a call is being received.)
•To select HIGH or LOW, press iRINGERl.
Each time you press the button, the
selected ringer volume will be displayed
and ring.
•To turn the ringer OFF, press and hold
I
RINGER)
until 2 beeps sound. “Ringer
off” will be displayed.
•To turn the ringer ON, press [ ringer ].
The ringer will sound at the HIGH level.
HIGH
LOW
OFF
17