Panasonic KX-TG2670N - Manual (Page 51)

During an intercom call:
•Intercom calls can only be ended with the handset.
•If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing Q.
•if an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, if you are using the handset, press
S)
or
CE)-
If you
are using the base unit, press I DIGITAL SP-PHONEI.
Transferring a Call Using the Intercom
The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
1 Handset:
During a call, press
(INTERCOM). Talk to the
paged party after the beeps.
•The call is put on hold and
“Intercom hold” is displayed.
■If the base unit user does not
answer, press S) or I ]■
From the base unit to the
handset
I Base unit:
During a call, press
ILOCATOR/INTERCOM).
•The call is put on hold and
“Paging" is displayed.
•If the handset user does not
answer, press
(DIGITAL SP-PHONE].
Base unit:
When the paging party’s
voice is heard, answer using
the
MIC.
Handset:
Press (INTERCOM) to answer
the page.
•“intercom hold” ts displayed.
Base unit:
To answer the call, press
IDIGITAL SP-PHONE).
•The transfer is complete.
Handset:
To answer the call, press
S) or CS-
•The transfer is complete.
51