Panasonic KX-TG2670N - Manual (Page 54)

Automatic Answering Operation
When the unit answers a call, a greeting message is played and the
caller’s message is recorded. While recording, Answering will
flash on the base unit display.
•The total recording time (including greeting message) is about
15 minutes. If messages are recorded in noisy rooms, the time may
be shortened by up to 3 minutes.
•A maximum of 64 messages (including greeting message) can be
recorded.
Setting the Unit to Answer Caiis
Press I ANSWER ON] to turn on the answering system.
•The indicator lights and “Answer set” is
heard.
•The unit wiil announce the remaining
recording time if it is iess than 5 minutes.
•If you hear “Memory full”, “Message
full” is displayed on the base unit and
the ANSWER ON indicator flashes
rapidly, erase some, or all, of the
messages (p. 57).
I ANSWER ONI
and Indicator
•If you do not want the unit to answer calls, press I ANSWER ON I again to turn off
the answering system. The indicator light goes out and “Answer off’ is heard.
•You can also turn on the answering system remotely using any other phone
(p. 69).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the base unit
speaker.
To answer the call with the base unit speakerphone, press
I
DIGITAL SP-PHONEl.
For the handset, press S) O'' CS- The unit
stops recording.
If the cal) monitoring feature is not required, turn it off by pressing and
holding [EXIT] in the standby mode. Each time you press and hold lEXlTl
in the standby mode, the feature will turn on or off.
While monitoring a call, you can turn the feature ON by pressing (^ or ®.
54