Panasonic NV-G21 - Manual (Page 6)

I^Qwer Source for the Digital Scanner SpecifIcatlona
M The Digital Scanner is powered by 4 lEC “R03” size
batteries. The life of the batteries is about one year, however,
it depends on the frequency of use. Inspect and if necessary,
replace the batteries once a year.
CAUTION FOR BATTERY REPLACEMENT
«Load the new batteries with their polarities (0 and 0) aligned
correctly.
•Do not apply heat to batteries, or internal short-circuit may
occur.
•If you do not intend to use the Digital Scanner for a long period
of time, remove the batteries and store them in a cool and dry
place.
•Remove spent batteries immediately and dispose of them.
•Do not use old and new batteries together. (Also never use an
alkaline battery with a manganese battery.)
Load the batteries as follows:
Power Source:
Dimensions:
Weight:
Accessories;
D C 6 V
20.5(W)x31 (H)x157(D)mm
Approx. 45 g (without batteries)
4 pcs. lEC “R03" size batteries
Programming Sheet
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
O Remove the lid on the
rear of the scanner.
Load 4 lEC "R03” size
batteries as shown in the
illustration
with their
polarities (0 and 0)
aligned correctly.
Replace the lid.
Ascommandation
To save battery power, make sure to set the Power On/Off
iSwiich to "OFF" after using the Digital Scanner. When the
paQpriee are exhausted, the bar code reading can no longer be
performed.
Matsushita Electric Trading Co., Ltd.
P.O. Box 286, Central Osaka, Japan
F0187T1027-10000 CD
Printed in Japan
И
II