Panasonic NV-G21 - Manual (Page 19)

RECORDING
itm^
tmS
1- II i
■
11
.=:
È
o o
Preparation
•Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Make sure that the Timer Record Button is set to “Off”.
•Reset the Tape Counter to “0:00.00”.
•Set the VTR/TV Selector to “VTR”.
• * **' ' ' ■' ' ‘ “ " “ : " * : '
STOP PAUSE/STILL REC*
t> oo □ DD
o e
B □ □ □
Select on the VTR, the programme position (channel)
to be recorded. In order to confirm proper reception,
turn on the TV set and select the video playback
channel.
n
U
0 Press the Record Button (•).
REC# REC
When a video cassette with broken out tab is inserted,
it will be automatically ejected.
•During recording, the programme position (channel)
on the VTR cannot be changed.
If You Wish to Avoid Recording Unwanted Material
0 Press the Pause/Still Button ( I I ) to stop the tape
temporarily.
PAUSE/STILL REC
00
•Press the Pause/Still Button ( I I ) again to continue
the recording.
•If you leave the VTR in the pause mode for more than
5 minutes, the VTR will automatically switch over to
the stop mode to protect the tape and the video
heads.
To Finish the Recording
0 Press the Stop Button (■).
STOP
□
Recording One TV Programme While Watching
Another
You can watch one programme on the TV while recording
another on the VTR.
1. Record (following steps O O)-
2. Set the VTR/TV Selector to “TV”.
3. Select the desired programme position (channel) on
your TV set.
•Ensure all cables from the Video Input and Audio
Input sockets are disconnected before starting the
recording. If they remain connected, it is impossible
to record TV programmes.