Panasonic NV-G21 - Manual (Page 17)

Super Still Playback
When the VTR is in the playback mode, press the
Pause/Still Button ( I I ) to view a super still-picture. To
continue the normal playback, press this button again.
0
Double Speed Playback (Remote Controller
only)
When the VTR is in the playback mode, press the Double
Speed Playback Button on the Infra-red Remote Controller
to view a double speed playback picture. To continue the
normal playback, press the Play Button.
0 Super Still Advance Playback
(Remote Controller only)
Press the Still Advance Button (»►) on the Remote
Controller unit while the VTR is in the still playback mode.
Each time you press this button, the still-picture will
advance one frame.
0 Double Super Fine Slow Playback
(Remote Controller only)
During normal playback, the Slow-motion playback can be
activated by pressing the Slow Button {t*) on the Remote
Controller unit. Slow-motion playback between and %
of the normal speed can then be obtained by using the Slow
{+) or (-) Button.
•Press the Play Button (►) to continue the normal
playback.
•If the Slow playback operation continues for more than 5
minutes, the VTR automatically switches over to the stop
mode.
•While playing back a tape in the Super Still or Double
Super Fine Slow playback mode on a TV set equipped
with an automatic vertical hold control, the picture may
shake vertically. In this case, set the
TV set’s vertical hold
(AUTO/MANUAL) selector to the “MANUAL” position,
and adjust the vertical hold control.
Stow Tracking Control
•When noise bars appear during Super Still, Super Still
Advance or Double Super Fine Slow playback, switch
over to slow playback and adjust the Slow Tracking
Control to reduce the noise bars.
•It may not be possible to eliminate the noise bars
completely.