Vcr & cassette information, Reset all vcr memory functions, Prevent accidental tape erasure – Panasonic PV-V4520 User Manual
Page 30: Dst (daylight saving time), Spring (first sunday in april), Autumn (last sunday in october), Record/playback time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR & Cassette Information
Reset all VCR Memory Functions
Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
• Make sure a tape is not inserted in the VCR.
for moro ths.n 5 soconds.
• The power will shut off.
3 Do “One Time VCR Setup” steps on page 6.
Prevent Accidental Tape Erasure
Break off the tab to prevent
recording.
Record Tab
Screw driver
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. (Page 7.)
Spring (First Sunday in April)
DST:ON -> sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON -> Turns clock back one hour.
• If your area does not observe Daylight Saving
Time, select DST:OFF.
• Keep these time changes in mind when
programming the VCR for timer recordings.
Record/Playback Time
Only use tapes with the ivns mark in this unit.
Tape Speed
Setting
Type of Video Cassette
T60
T120
T160
SP
(Standard Play)
1
Hour
2 Hours
2 Hours
40 Minutes
LP
(Long Play)
2 Hours
4 Hours
5 Hours
20 Minutes
SLP
(Super Long Play)
3 Hours
6
Hours
8
Hours
30
For assistance, call 1-800-211-PANA{7262).