Panasonic PV-V4520 - Manual (Page 16)

Timer Recording Using VCR Plus+ System (continued)
It is necessary to program the VCR with local channel
information for proper VCR Plus+ System operation.
VCR Plus+ System Channel Setup
• At first, do Channel Setup Preparations below right.
a 1 Display menu.
% Press ACTION.^
Process of Recording
ConnectionC> о Programming
2
MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
IDI ОМА/LANGUE: ENGLISH
VCR’ S OUTPUT CH:3
SELECT:* ▼ KEY
SET ;► KEY
END ;ACTI0N KEY
Select SET UP
CHANNEL.
1) Press AT
to select.
2) Press ►
to display.
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR PIUS+ CH SET UP
SELECT
SET
END
* ▼ KEY
► KEY
ACTION KEY
Select VCR Plus+
CHANNEL SETUP.
1) Press AT
to select.
2) Press ►
to display.
4
VCR Plus+ CH SET UP
GUIDE CH CABLE CH
*• gs —
02 —
SELECT:* ▼ KEY
SET :► KEY
END :ACT 1 ON KEY
VCR Plus+ CH SET UP
GUIDE CH CABLE CH
► 01
Ш
02 --
SELECT:* ▼ KEY
SET :M KEY
END :ACTION KEY
Enter VCR Plus+
channels.
1) Press ►
to move
cursor to
right
column.
2) Press AT to change
CABLE CH number.
3) Press ◄ to set.
4) Press
AT to scroll
up/down GUIDE CH
column.
• Repeat step 4 until list is
complete.
To Make Corrections,
press
AT and ► to move to error, then AT to change,
or ADD/DLT to erase number.
End setup.
Press ACTION three times.
Make each entry within 5 minutes or the VCR will exit this mode.
Once local channels have been programmed, they will stay in
memory, even in the case of a power failure.
16
SELECT/
SET
A :PI-AY
T :STOP
◄ :REW
► :FF
CD QD CD
GO CD CD
CD CD CD
___ ___ AOCrtja
CD CD СЩ-
COUNTER RESET WSPHY TA?E POSITION
О CD О
pause cm skip speed search ,
GD
о о
O-i
SLOff
SAPflHi-Fi
©
© ©I
VOL CH 5
G3
REC
ADD/DELETE
Model PV-V4520
remote is
shown here.
Channel Setup Preparations
In order to complete step 4 (at left), make a
local channel list (see example below).
You will need the following:
• A line up of normal TV and/ or Cable stations
and the channel number you receive them on.
• A list of Guide (VCR Plus+) channel numbers for
the stations you receive found in TV Guide and
selected newspapers.
1 Make a 3-column chart. In the left column, write
the name of all the stations you receive.
2 In the middle column, write each station’s Guide
(VCR Plus+) number from TV Guide.
3 In the right column, write the channel number
your TV receives the station on.
EXAMPLE ONLY
Broadcast or
Cable
Station Name
Assigned
Guide
(VCR P1US+)
channel no.
Channel no.
your TV
receives the
station on
HBO 33 15
Nickelodeon 38 20
CBS 04 04
X FOX 11