When set to proper audio mode vcr can, Display audio mode, Select desired mode – Panasonic PV-V4520 User Manual
Page 25: Do a recording, Start playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono {main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
• The selected broadcast sound is always recorded on the left and right Hi-Fi track as well as the normal
monaural track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
Audio Mode for Recording
Display audio mode.
Press SAP/ Hi-Fi.
2
........'S
((■STEREO
((■SAP ^
MONO
Select desired mode.
Press SAP/ Hi-Fi
repeatedly (each
press within 5
seconds).
Refer to "Receivable
3
. Arrow indicates selection. Broadcast Types" on page 24.
Do a recording.
See page 9.
Audio Mode for Playback
start playback.
See page 8.
1 SAP/
i Hi-Fi
2
b
c
Display audio mode.
Press SAP/ Hi-Fi.
HIM a/R)*«
HIFI {
l
HIFI(R)
NORMAL
-
___ J
Arrow indicates selection.
Select desired mode.
Press SAP/ Hi-Fi
repeatedly (each
press within 5
seconds).
Select '‘HIFI(L/R)" or ‘'HIFI(L)" or
"HIFI{R)” to listen to stereo
recordings in stereo sound.
Select "NORMAL" for monaural
sound.
Only tapes recorded in Hi-Fi stereo
will playback with true stereo sound.
Standard stereo tapes will playback
in monaural sound.
To listen to Hi-Fi stereo playback, the
VCR AUDIO (UR) jacks must be
connected to a stereo TV or an
external stereo amp and speakers.
(See page 24.)
If tracking is adjusted during playback,
Hi-Fi audio may revert to normal
audio.
Hi-Fi and normal audio playback
volume level may differ.
25