Panasonic PV-4614 - Manual (Page 16)

\> )\ Tape Operation
Your VCR is equipped with several time
saving features as well as convenient
automatic functions which make tape
operation easier than ever. Repeat Play
You can set your VCR up to play a recording over and
Push MENU to
display the menu.
over.
MENU
r:.............
MENU........................
SET CLOCK
SET UP CHANNEL
ID IОМА/LANGUE:ENGLISH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate and push the
WHEEL to select
SET UP VCR.
................ SET UP VCR......................
REPEAT PLAY ON
8EEPER ; ON
INPUT SELECT : TUNER
SET UP COMMERCIAL AOV.
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate the WHEEL to
select “REPEAT
PLAY”, then push to
select “ON” or “OFF”.
The VCR plays to the end of a tape, or until a blank portion of 30
seconds or more is reached. (Erased portions of tape are not considered
blank.) The tape is then automatically rewound and played again and
again until Repeat Play is cancelled. All function buttons (REW, FF, etc.)
are operational during Repeat Play.
Push MENU twice to
leave this screen.
Auto Operation Functions
Auto Playback
When a tape is inserted, the power comes
on (Auto). If the record tab* is removed,
playback begins (Auto).
Auto Rewind
After a tape reaches its end during
playback, fast forward or manual record,
the VCR will rewind and go into Stop mode.
Playback Auto Eject
After a tape without a record tab* is played
to its end, the VCR will rewind and then
eject the tape.
Memory Rewind Off
When the POWER button is pushed during
rewind, the VCR will turn off after rewind is
complete.
Eject Cassette
A cassette may be ejected with power on
or off.
* For record tab information, see page 5.
Zero Search
You can reset the Time Counter to zero and then return to that point.
Push DISPLAY to
display the Time
Counter overlay.
STOP 12:00AM CHOe
0:00:30
SLP
Push COUNTER
RESET to reset the
Time Counter.
• This may be done at as
many places as you wish
on the tape.
STOP 12:00AM CH08
0:00:00
SLP
Push C/A SKIP ZERO
in Stop mode.
• The VCR will go into FF or REW mode and stop at
the last point the Time Counter was set to 0:00:00.
16