Panasonic PV-4614 - Manual (Page 11)

: Push VCR CH A
I
to start Channel
i Auto Set and
1 Clock Auto Set.
CHANNEL/ClOCKAliTOSET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN,,,
PLEASE PUSH CH UP KEY
These on-screen displays will appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
or-
(case 2 )
12
/
25/1996
WED
12
;
00
PH
DST; ON
SETTING : CH02
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Case 1 ) Confirm that displayed time is
'-------- ^ correct and push CH A to exit.
If the displayed time and D.S.T. are
incorrect, please proceed as follows:
In the rare event that you live close to
two different time zones, the VCR may
recognize the wrong PBS station as the
setting channei. In this case, piease do
the following:
1 Make a note of the SETTING:CH number
shown on-screen and push CH ▲ to exit.
■2 Delete the setting channel from the VCR
channel memory. {See the Add or Delete a
channel section on page 12.)
3 Push the MENU button to display the menu.
4 Rotate and push the Wheel to select “SET
CLOCK" and then to select “AUTO SET.”
• If you use a cable box and have multiple
PBS stations, tune the cable box to a
different PBS station and try auto clock set
again using the menu.
(case screen above appears, auto
^^ clock set is not available in your
area. Please set the clock manually
as described at right.
Manual Clock Set
1 Push MENU to display
the set clock screen.
2 Rotate and push the
Wheel to select and
enter the month, date,
year, time and D.S.T.
(Daylight Saving Time).
*M7-" SET CLOCK...........................
DST:ON
saiBEMua
BY ROTATING YlfHEEL
:PUSH WHEELS
TO END PUSH MENU KEY
“DST:ON" automatically
adjusts for daylight
saving time.
(See page 5.)
To Make Corrections,
push the Wheel or CLEAR button repeatedly
to move back or forward to the desired item.
3 Push MENU twice to
start the clock and
exit this mode.
.............. SET CLOCK......................
2/ 2/1996 FRI 1:
TO CORRECT
PUSH WHEEL OR CLEAR KEY
TO START PUSH MENU KEY
IMPORTANT NOTE FOR AUTO CLOCK SET:
• Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable box and you
want auto clock set to be performed, the cable box must be left on and tuned to the PBS channel before the VCR
power is turned off.
• If you use a DSS receiver, it must be turned off for auto clock set.
• If you use AudioA/ideo Jack connection between the VCR and Cable Box or DSS receiver, you must also connect
the RF coaxial cable in order to use the auto clock set and channel auto set features.
11