Panasonic KX-FP200 - Manual (Page 9)

4
} Fan the stack of paper to avoid a paper jam and
insert the paper into the paper tray.
oThe height of the stack of the paper should not
exceed the upper limit on the paper tray, or it
may cause a paper jam.
oThe paper should not be over the tab.
o|f the paper is not inserted correctly, readjust the
paper or a paper jam may occur.
stack of
paper
Paper tray
Correct Incorrect
Move the recording paper set lever back.
o|f the lever releases, the unit will beep and the
following message is displayed.
Display; CHECK LEVER
Move the lever back again.
Puli out the paper stacker from the bottom of the
unit completely.
oDo not place the unit in areas where the paper
tray may be obstructed by walls, etc.
Recording paper
set lever
O
f=5>
3
(/>
»
o’
3
Note:
oDo not use different types or thicknesses of paper in the paper tray at the same time. This may cause a
paper jam.
©Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkied paper with a cotton and/or fiber content that is over 20 %.
©Avoid used paper for double-sided printing.
©Do not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam
may occur.
Adding paper to the paper tray
1. Pull the recording paper set lever forwards.
©The unit will beep and the following message is
displayed.
Display: CHECK LEVER
2. Remove the installed paper.
3. Add paper to the removed paper.
4. Fan the stack of paper and insert it into the paper
tray.
5. Move the recording paper set lever back.
Recording paper
set lever
For Assistance, Call 1-800-435-7329