Panasonic KX-FP200 - Manual (Page 31)

TONE, FLASN and REDIAL/FAUSE bytoni
The TONE {*) button is used for rotary pulse dial
services and allows you to temporarily change from
pulse to tone mode during a dialing operation.
When you hang up, the unit will automatically return to
the pulse mode.
The FLASH button functions as the hookswitch on a
regular phone. If you misdial or dial another phone
number, press the FLASH button firmly.
The FLASH button also allows you to use special
features of a host exchange (if connected) or local
telephone company services such as call waiting. For
further details, contact your local telephone company.
Note:
oTONE, FLASH and PAUSE can be stored
into a phone number for automatic dialing.
Redialimig №e last numbeir dialed
If the REDIAL7PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will
be redialed.
1 . Lift the handset or press (SP-PHON]^.
2. Press (REDIAL/PAUSE).
o|f the line is busy when using the SP-PHONE button, the unit will automatically redial the number up to
14 times.
Enteiriinig pauses
If the REDIAL7PAUSE button is pressed during dialing, a pause will be inserted.
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside tine.
Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end
of the phone number.
31