Panasonic KX-FP200 - Manual (Page 23)

Glhainginig ihe setting of the AUTO RECEIVE mode
Change the AUTO RECEIVE setting from the FAX mode to the EXT.TAM mode.
^ Press [MENU].
41
Display:
Press then \T].
SYSTEM SET UP
AUTO RECEIVE
Press [START/COPY/SETl.
MODE=FAX [ V A ]
Press @ or @ to select EXT.TAM.
MODE=EXT,TAM[ VA]
oTo return to the FAX mode, select FAX.
Press [START/COPY/SETl.
Press [MENU].
Using the EXT.TAM mode
To set the facsimile unit and telephone answering machine to receive voice messages and send fax
messages, proceed as follows.
1 Turn on the answering machine.
o|f the answering machine is not turned on, all
incoming calls will be answered by the facsimile
unit and callers cannot leave messages.
Press [AUTO^ECEiVE] on the facsimile unit until
the FAX indicator light goes on.
oThe display shows the following message.
Display: EXT.TAM MODE
Note:
©Every time the facsimile unit receives a document, a
silent pause or a fax tone may be recorded on the
answering machine.
©Set the receive mode of the facsimile unit to the TEL
mode under the following conditions:
—when you wish to set the number of rings on the
answering machine to more than 5, or
—when you wish to use the auto transfer functions
(transfer, pager alert, etc.) on the answering
machine.
Note that automatic fax sending can not be received
automatically in the TEL mode.
23