Panasonic DVD-RV40 - Manual (Page 40)

E! Front (L) Center Front (R)
Larae/Small Laroe/Small/No Larae/Snrìall
Exit
O
O
iiw
Sqeakef Settinc
o -
Exit
dB iS'
-m
ress RETURN to exit
Surround (L)
Larae/Small/No
■ Subwoofer
Yes/No
Surround (R)
Large/Smal!/No
aUnderlined items are factory preset.
In case of surround speaker (L)
No Large/Yes SmallA^es
IfS®;.-
©
O
EÄ
Speaker : jetting
0
rriA
0
■ HB ■ .
Exit : 0 ■
’dB
0
dB
V"
. 0 ,
.mi' dB
Press RETURN to exit
Center delay time
fO ms^
Surround delay time
(0_ms)
• Underlined items are factory preset.
Place ail your speakers within this circumference
Center
channel balance fO dB^
Subwoofer
channel
balance
(Q_£fS)
Surround (L)
channel balance fO dS)
Surround (R)
channel balance fO dB)
• Underlined items are factory preset.
Home theater
Setting the size and presence of your
speakers
1. Press the cursor buttons [▲, T, < , ►] to select the item
and press [ENTER].
2. Press the cursor buttons [ A , T ] to select the setting and
press [ENTER].
• Large speaker icon
If the speaker supports low-frequency {under 100 Hz) reproduc­
tion
•Small speaker icon
If the speaker does not support low-frequency reproduction.
•If you do not connect a subwoofer, it is preferable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz,
Delay time
I DVD I (Doiby Digital only)
1. Press the cursor buttons [ A , ▼, M , ^] to select the item
and press [ENTER].
2. Press the cursor buttons [ A , T ] to adjust the delay time
and press [ENTER].
•Center speaker
Set delay time to “0 ms” (factory preset) if D f is less than or
equal to Dc.
If D f -D c = then set to
approx. 50 cm 1.3 ms
approx. 100 cm 2.6 ms
approx. 150 cm 3.9 ms
approx. 200 cm 5.3 ms
•Surround speaker
Set delay time to “0 ms” (factory preset) if D f and Ds are equal.
if D f -D s - then set to
approx. 200 cm 5,3 ms
approx. 400 cm 10.6 ms
approx. 600 cm 15.9 ms
Channel balance
1. Press the cursor buttons [ A , T , ◄, ►] to select “Test” and
press [ENTER].
A test signal is output from one speaker at a time, starting with
the front left speaker and proceeding clockwise.
FRONT(L) ----------
T
SURROUND(L)«-
CENTER FRONT{R)
i
SURROUND(R)
2. While listening to the test signal, press the cursor buttons
[ A , T ] to adjust the volume of the center and surround
speakers so they are the same apparent volume as the front
speakers. (The front speakers cannot be adjusted here.)
3. Press [ENTER]. (The test signals are stopped.)
•A test signal is not output from the subwoofer. To adjust its volume,
play something, then return to this screen to adjust to your taste.
VQT8633