Panasonic DVD-RV40 - Manual (Page 11)

ta
§
S
CO
131
i
Back of the player These figures show DVD-RV40C
• DVD-RV20 has 1 VIDEO OUT terminal.
• If your television is monaural, use a stereo-monaural audio cable instead of the supplied audio/video cable. The video part of the cable (yellow)
can still be used if required. Audio cable „—fr-t.
__ I „ ^ To player audio output terminal (white, “L")
To TV audio input terminal lc~- ............... C _____
To player audio output terminal (red, “R")
COMPONENT ^
VIDEO IN
Back of the player These figures show DVD-RV40.
Video cable
Component video output terminals (Y/P b /P r )
The component video output terminals output the
colour difference signals (P
b /P r ) and luminance signal
(Y) separately in order to achieve high fidelity in
reproducing colours.
•The description of the component video input
terminals depends on the television or monitor
(e.g. Y/P b /P r , Y/B-Y/R-Y, Y/C b /C r and so on).
Connect to terminals of the same colour.
• DVD-RV20 hast VIDEO OUT terminal.
•Additional equipment and cables are not supplied.
VQT8633