Panasonic DVD-RV40 - Manual (Page 39)

2-3-4-5
RETURN
1
SETUP
■o
1
SETUP
Q
1 Disc Languages
O 2 Ratings Level
ES3 3 Menu Language English
G33 4 On-Screen Messages
EuD 5 FL Display
Bright
0 TV Aspect 4::^
S5S. 7 Digital Audio Output
3 Speaker Setting 2-channet
9 Other Settings
Press RETURN to exit
Home theater
DVD-RV40
Here you can change the settings for the built-in Dolby Digital
decoder. These changes will have no effect if you connect the
player to other equipment through the digital audio output terminal.
Make changes to the settings on the equipment you have
connected.
Common procedure
(32 OH) ►
1 Press [SETUP] in the stop mode.
The initial settings screen is displayed.
2 Press the cursor buttons t A . T ] to se­
lect “8 Speaker Setting” and press
[ENTER].
3 Press the cursor buttons [A, T] to se­
lect the Item and press [ENTER].
1 Multi-channel
If you have connected three or more speakers. (Proceed
to step 4.)
2 2-channel (Factory preset)
If you have connected 2 speakers. (You will return to the
menu shown in step 1. Settings are not necessary.)
4 Change settings to suit your speakers
and the listening position (-»page40).
•Setting the size and presence of your speakers
Choose “Yes” for speakers you have connected. Sound
will not be output if you choose “No”.
• Delay time
Allows you to make up for differences in distance if you
cannot place your speakers in the optimum position. (Dolby
Digital DVD only)
•Channel balance
Allows you to adjust the output level of the speakers to
make up for differences in volume caused by different
types of speaker or distance.
5 Press the cursor buttons [A,W^]
to select “Exit” and press [ENTER].
The screen illustrated in step 2 is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [SETUP] or [RETURN] .
(Continued on next page)
(2 d 03 ► [ffiia
I
S
g
i
I
VQtS633