When you have finished connection, Connecting the amplifier or system component, Connecting a subwoofer – Panasonic DVD-RV40 User Manual
Page 34: Idvd-rv201, Dolby pro logic amplifiers, Audio cable, Active subwoofer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Home theater
Active subwoofer
• Use the GUI screens to turn subwoofer output on item ®
on page 25).
•Place the subwoofer as close as possible to the front center.
•Adjust the volume of the subwoofer to suit your preference.
When you have finished connection
• Go to “7 Digital Audio Output” and set ”1 PCM Down Conversion"
to “No” (w page 37).
►Additional equipment and cables are not supplied.
You can enjoy stereo sound if you connect an amplifier or system component that has 2-channel audio input terminals. By connecting a
subwoofer, you can also enjoy powerful bass.
■ Connecting the amplifier or system component
Amplifier and speakers or system component
•Read the instructions for the amplifier and speakers or
system component for connection details.
Back of the player
Connecting a
subwoofer
IDVD-RV201
Dolby Pro Logic amplifiers
•If you connect a Dolby Pro Logic amplifier, you will
also need to connect center and surround
speakers to enjoy surround sound. Read the
instructions for the equipment for connection
details.
•Turn off V.S.S. (* page 20) and subwoofer
output item ® on page 25). Dolby Pro Logic
will not function correctly if they are on.
These figures show ! DVD-RV20;
Audio cable
rh
®
I
U
INPUT
0
— Active subwoofer
• Use the GUI screens to turn subwoofer output on item (g)
on page 25).
• Place the subwoofer as close as possible to the front center.
•Adjust the volume of the subwoofer to suit your preference.
When you have finished connection
• Go to “7 Digital Audio Output" and set “1 PCM Down Conversion"
to “No" («• page 37).
• In "8 Speaker Setting", select ‘2 2'Channel" page 39). |
DVD-RV40
VQT8633
•Additional equipment and cables are not supplied.