Panasonic DVD-RV40 - Manual (Page 35)

You сап enjoy the multi-channel surround sound found on DVD recorded with Doiby Digital, DTS Digital Surround or MPEG by connecting
amplifier with a built-in decoder or a separate decoder-amplifier combination. an
s
I
When you have finished connection
• Make changes to “7 Digital Audio Outpuf to suit your decoder page 37).
Decoder
item
Dolby Digital decoder ■
DTS Digital Surround
decoder
Dolby Digital/
DTS Digital Surround
decoder Dolby Digital/
DTS Digital Surround /
MPEG audio decoder
PCM Down Conversion Yes- Yes--' Yes'^ Yes-
Dolby Digital Bitstream PCM Bitstream Bitstream
DTS Digital Surround Off Bitstream Bitstream Bitstream
MPEG PCM PCM PCM Bitstream
S;lf this is set to “No", no audio will be output when DVDs recorded in 96 kHz linear PCM are played. (Audio will be output as it is if the DVD does
not have oopyright protection recorded on it.)
•These changes to digital audio output must be made, otherwise bitstream signals the decoder cannot handle wiil be output. If
these signals are output, “noise” will be output which can cause harm to your ears and speakers.
DVD-RV40 •in “8 Speaker Settings", select "2 2-channel” (■• page 39).
The sound for speakers other than the front left and right speakers will not be heard if you do not select “2 2-channer.
•You cannot use DTS Digital Surround decoders not suited to DVD.
• Additional equipment and cabies are not supplied.
VQTB633