Cabletron Systems 1088 - Manual (Page 54)

C o n f i g u r a t i o n V i e w s F a s t E t h e r n e t C o n f i g u r a t i o n V i e w
S p e c t r u m E n t e r p r i s e M a n a g e r Page 55 S m a r t S w i t c h 6 0 0 0
Advertised Ability selections. You can only select
one Operational Mode.
Table 22 shows the
current modes, their values, and descriptions.
Table 22: Operational Mode Values
Advertised Ability
This panel, in the Fast Ethernet Configuration
view, shows the advertised ability of the local
hardware, which only becomes active on ports
that have Auto-Negotiation enabled. Auto-
negotiation allows the FE-100TX RJ45 port to
self-configure to 10 or 100 Mbps depending on
the speed of the attached module. The interfaces
can also dynamically configure themselves for
Full Duplex or Half Duplex (standard mode)
operation when both ends of the link support
auto-negotiation. When only one link partner
supports auto-negotiation, the mode defaults to
half duplex.
Table 23 lists the advertised ability
modes, their values, and descriptions.
Table 23: Advertised Ability Values
Received Technology
This panel, in the Fast Ethernet Configuration
view, shows the received technology of the remote
hardware, or link partner.
Table 24 lists the
received technology modes, their values, and
descriptions. These modes are read only.
Operational Mode Value Description
Auto Negotiation 2 Auto Negotiation/Parallel
Detect.
10Base-T 8 10Base-T
10Base-TFD 16 Full duplex 10Base-T
100Base-TX 32 100Base-TX
100Base-TXFD 64 Full duplex 100Base-TX
100Base-T4 128 100Base-T4
100Base-FX 256 100Base-FX
100Base-FXFD 512 Full Duplex 100Base-FX
Advertised
Ability
Value Description
10Base-T 8 10Base-T
10Base-TFD 16 Full Duplex 10Base-T
100Base-TX 32 100Base-TX
100Base-TXFD 64 Full Duplex 100Base-TX
100Base-T4 128 100Base-T4
100Base-FX 256 100Base-FX
100Base-FXFD 512 Full Duplex 100Base-FX