Cabletron Systems 1088 - Manual (Page 30)

D e v i c e V i e w s I n t e r f a c e D e v i c e V i e w
S p e c t r u m E n t e r p r i s e M a n a g e r Page 31 S m a r t S w i t c h 6 0 0 0
Interface Icon
This icon is a logical representation of a network
interface or port, see
Interface Device View (page
30) . Figure 8 shows a sample Interface icon, its
labels and double-click zones.
Figure 8: Network Interface Module Icon
Interface Number Label
This label identifies this interface (”e” indicates an
Ethernet interface, “b” indicates a backplane
interface, and the numeral represents the
interface number on this module).
Interface Type Label
This label displays the type of network interface
module (e.g., Ethernet, FDDI, etc.).
Interface Icon Subviews
Table 11 describes each of the Icon Subviews
menu selections available for the Interface icon.
Administrative Status Label
This label displays the state of this port (On, Off,
Testing).
Table 12 and Table 13 list the possible
states relative to the application selected. The
( c )
( d )
( e )
( f )
( a ) ( b )
e1
Ethernet
0:0:1D:17:2F:3C
0
Interface Icon Subviews Menu
(a) Interface Number Label
(b) Status Label/Port Configuration
(c) Interface Type Label
(d) MAC Address Label/Model Information
(e) Network Information Label/Secondary Address Panel
(f) Gauge Label/Port Performance
ON
Table 11: Interface Icon Subviews
Menu Selection Opens the...
Configuration Port Configuration - CSIIfPort View
(page 49) .
Secondary
Address Panel Panel that provides the secondary
address and mask for the interface.
Protocols
(with HSIM only) ATM Client Application (page 41) .
Model
Information Model Information view described in
SPECTRUM Views.