Cabletron Systems 1088 - Manual (Page 34)

D e v i c e V i e w s B a c k p l a n e M o d u l e I c o n S u b v i e w s
S p e c t r u m E n t e r p r i s e M a n a g e r Page 35 S m a r t S w i t c h 6 0 0 0
Module Identification Labels
These labels provide the following information
that identifies a specific device.
Slot Number
The module’s location in the chassis. Double-click
this area to open the Application view described
under
Applications View (page 38) .
Model Type
The type of module in the chassis (for example
6E132-25). Double-click this area to open the
Model Information view.
For more information on the Model Information
view, refer to the SPECTRUM Views
documentation.
Model Name
A user-defined name; otherwise, it defaults to the
IP address. Double-click this area to open the
Device Configuration View (page 47) .
Backplane Connections Labels
These labels represent the interfaces between the
module and the FTM backplane. The device-
specific Icon Subviews menu selection for these
labels is Configuration, which opens a dialog box
that lets you enable or disable the selected port.
Note in
Figure 15 that the Backplane Module icon
has a gray Backplane Connection label (b4),
which corresponds with interface four of the
chassis backplane.
Table 15 describes the possible operational states
of the backplane connections.
Table 15: Backplane Connection Status
Descriptions
Chassis Information
The Chassis Information panel within the
Backplane Device view provides the same
information as a similar panel in the Chassis
Device view described under
Chassis Information
(page 29) .
Color Status Description
Green ON Operational
Yellow NLK Operational but not linked
Magenta Test Operational test
Blue Off Operationally and administratively
down
Red Off Operationally down but
administratively enabled
Gray UNK Unknown