Dynon Avionics DX15 - Manual (Page 42)

Appendices
6‐4 DX15 User Guide
Battery display does
not indicate charge
when plugged in No power at
wall outlet Check that wall outlet is
supplying power
Fuse blown Check the fuse in the body
of the vehicle charger plug Battery will not
charge with Vehicle
Power Adapter
No power
coming from
vehicle Check that vehicle is
supplying power
Nothing happens
when front panel
buttons are pushed Keypad is
locked Unlock Keypad by pressing
and holding the LOCK
button
Noise bursts are
heard often Squelch is set
too low Adjust squelch to a higher
number
Display says ERR The DX15 has
detected a
software fault Cycle Power, including
removing battery; Perform
factory reset procedure; if
this doesn’t help, contact
Dynon Avionics Technical
Support
Appendix C: Requesting Support / Repair
Before contacting Dynon Avionics Technical Support, please consult the
Troubleshooting Appendix for common issues and solutions for details.
In some circumstances, performing a Factory Reset may fix some issues ‐
please consult Appendix D ‐ Factory Reset / Defaults for details.