Dynon Avionics DX15 - Manual (Page 28)

Features In Depth
4‐4 DX15 User Guide
 To store the frequency, push the MEM button again. MEM‐XX will
flash momentarily.
 Your DX15 is now in Memory Channel mode on the just‐stored
Memory Channel.
Push the CLR button to exit Memory Channel mode at any time.
Note: If all 100 Memory Channels have frequencies stored, Memory
Channel 99 will be selected, and if a new frequency is stored, the
frequency already stored in Memory Channel 99 will be overwritten.
RECALLING MEMORY CHANNELS
 Exit any other mode by pushing the CLR button on the keypad.
 Push the MEM button momentarily. This enters Memory Channel
Recall mode.
 Use the ◄ and ► or side ▲ and ▼ buttons to scroll through Memory
Channels.
 Or, type the two‐digit Memory Channel Number directly.
Push the CLR button to exit Memory Channel mode at any time.
QUICKLY RECALLING MEMORY CHANNELS 0‐9
 Exit any other mode by pushing the CLR button on the keypad.
 Press and hold 0‐9 to recall the channel stored in that location.
Push the CLR button to exit Memory Channel mode at any time.
SCANNING MEMORY CHANNELS
 Exit any other mode by pushing the CLR button on the keypad.
 Push the MEM button momentarily (enters Memory Channel mode).
 To scan up push and hold (for at least 1 second) the ► button. To scan
down push and hold the ◄ button.