Dynon Avionics DX15 - Manual (Page 26)

Features In Depth
4‐2 DX15 User Guide
The direction of scanning can be changed by pressing ◄ or ►.
Band Scanning can be stopped by:
 Pushing the CLR button.
 Pushing PTT.
 Pushing the Emergency button.
Recalling Recently Used Frequencies
Your DX15 automatically stores the ten (10) most Recently Used
Frequencies. These can be quickly recalled using the ▲ and ▼ buttons
on the side of the DX15. Think of them like an extended version of the
flip‐flop feature found on most digital panel‐mounted aircraft radios.
To recall a Recently Used Frequency:
 Exit any other mode by pushing the CLR button on the keypad.
 Push the ▲ or ▼ buttons on the side to enter Recently Used
Frequencies mode. The ten (10) most Recently Used Frequencies are
displayed as r0 (most recently used) through r9 (10th most recently
used) in the lower right corner of the screen while in Recently Used
Frequencies.
 When you first enter this mode, the radio will both store and display
the currently‐tuned frequency into the r0 location. r0 will be displayed
in the lower right corner of the screen to denote that you are currently
recalling a Recently Used Frequency.
 Press ▲ and ▼ to cycle through the Recently Used frequencies.
Recently Used Frequencies can be scanned by pressing and holding ◄ or
► for 2 seconds, similar to band scanning. To stop scanning your
Recently Used Frequencies, push the CLR button.
Any of the following actions or events causes a frequency to be added to
the list of Recent Frequencies: