Viewing and setting the date – Dillon FI-90 User Manual
Page 18

18
3. After the clock is set, you may
press PRINT / SELECT to start
the clock and return to operations
mode menu,. . .
Hour is displayed and the clock
begins.
or
press GROSS / PEAK to return
to gross or peak-view mode. . .
The clock starts at the new time
setting.
1. From gross or peak-view mode,
press MENU repeatedly until
dAY is displayed, then press
PRINT / SELECT. . .
Depending on the configuration of
your indicator you will see the date
displayed in one of three ways:
day-month-year31.12.92
month-day-year12.31.92
year-month-day92.12.31
2. To change the date, start by
pressing UP ARROW to bring a
0 into the edit-character position,
and continue using the procedure
explained in the section, Entering
Data with Arrow Keys. Use the
same date format that you saw
when you displayed the date in
step 1.
3. Press PRINT / SELECT to return
to the operations mode menu,. . . The date is accepted and dAY is
displayed.
or
press GROSS / PEAK to return
to gross or peak-view mode. . .
The date is accepted and the display
returns to gross or peak-view mode.
Viewing and Setting the Date
If you enter an incorrect digit,
press ZERO / CLEAR key to
clear the display one digit at a
time.