Daiwa SEABORG-1000MT - Manual (Page 39)

37
Trouble shooting
22
9
2
2
5
2
24,28
24,28
25,26
25,26
2
19
20,21
19
19
32
23
10-15
Symptom Possible causes To do
Ref.
page
Motor does not
respond to the
power lever
Counter display
does not appear.
Inverse counter
does not appear
Jigging function
does not
respond
The reel jigs on
its own.
Auto stop
function does
not work
There are
counter errors.
Pickup does not
respond.
Did not pull the lever to OFF
position.
Unstable power source
Incorrect battery connection
Did not press
JIG/PICKUP BUTTON
Inverse counter is OFF
(default setting)
Power lever is at OFF
Low power voltage
Did not press RESET BUTTON
at surface
Error for sinker weight or
rocking of the boat
Line is elongated.
Line length has increased
due to stretching.
Speed setting is at zero
The counter displays 0.0 m.
Battery charge is low.
Cord worn or corroded
Pickup mode is selected
It is a normal function to avoid over
winding. Press RESET BUTTON to
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
It is normal. Press
INVERSE COUNTER BUTTON .
Using MODE BUTTON , change the
setting of this function.
Push the lever forward.
With MODE BUTTON , select the
jigging mode
Replace with a recharged battery.
Press RESET BUTTON to reset depth
to zero with rig at the surface.
Adjust settings of auto stop function.
Reset the depth counter at the surface.
- Reset the counter.
- Revise the display.
- Re-enter line data.
Press MODE BUTTON to select winding
speed setting.
Connect correctly.
Contact your dealer if the reel does not function properly despite the above details being con-
firmed, in the event of other problems arising, and to order parts.