Line data input, With backing line 2) – Daiwa SEABORG-1000MT User Manual

Page 16

Line data input

(With backing line 2)

This method is applied to data re-input which is to be made after the main line is wound up. This

method requires a main line of 100m or longer specific length.

Paying attention to the lineʼs color coding, pull 50m of line off of

the spool.

Connect the battery to the reel.

Press the

MODE SET BUTTON

for 5 seconds, changing the

mode to

Press the

MODE SET BUTTON

2 more times and set the

mode to backing line 2.

This mode shows

blinking on the low left of the display.

Press the

RESET BUTTON

for 2 seconds.

This will show the digits

100

in the lower area of the counter.