Daiwa SEABORG-1000MT - Manual (Page 27)

25
Functional setting operation
(8. Jigging)
Jigging
Jigging is an extremely valuable function.
After setting your preferences, pressing the JIG/PICKUP BUTTON starts the function.
Speed of the jigging can be adjusted with the power lever.
1. Press the MODE BUTTON to show pickup / jigging display.
(When jigging is chosen, the pickup function cannot be used.)
2. Jigging pattern is selected with the power lever.
There are four patterns; 123 (master), 1 step, 2 steps, 3 steps.
Jigging setting displays appear in the following order;
Pattern (step) > length (m) > waiting time (sec) > range (m)
3. Press MODE BUTTON to show the next display. Pressing it
also locks in the previous setting.
5.
After pressing the JIG/PICKUP BUTTON , use the power lever
to start jigging.
Jigging speed is controlled with the power lever.
As the jerking starts, indicator blinks.
Pressing the JIG/PICKUP BUTTON again stops jigging.
1
3
5
Interval time
Jig/pickup
Jigging distance
4. In the same manner, set length, waiting time and range.
By pressing the JIG/PICKUP BUTTON during the jigging setting
display, the display will show depth and begins jigging.
Pressing and holding the MODE BUTTON will quickly scroll you
back to the depth counter display.