CANOGA PERKINS 9145ELB Network Interface Device Hardware - Manual (Page 40)

9145ELB NID Hardware User’s Manual Operation
Setting Up the VT-100 Terminal
26
NOTE: The Microsoft Vista operating system does not include HyperTerminal. If your terminal
interface computer uses Windows Vista, you will need to use a different terminal emulation pro-
gram.
The following steps describe how to set up HyperTerminal on your PC.
1. Select Start > All Programs > Accessories > Communications > HyperTerminal. A
New Connection - HyperTerminal window will open.
2. Enter a name for the connection to the system in the Name box and select an icon to
identify this connection on your desktop. Click OK. The Connect To window opens.
3. Select COM from the Connect using drop down menu, and click OK. The Com1
Properties window will open.
4. At the COM 1 Properties window, on the Port Settings tab, select the following from the
appropriate dropdown menus and then click Apply:
• Bits per second: 9600 bps
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
5. Click OK. HyperTerminal connects to the system and VT100 terminal emulation starts.
6. In the Hyperterminal window toolbar, click the Properties button, then select the Settings
tab. From the Emulation drop down menu, select VT100 and click OK.
• The default username is admin.
• The default password is admin (case sensitive).