CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 8)

CanogaView ® Smart Element Manager
2 Enterprise Version
1.2.2 Solaris Minimum Software Requirements
•
Sun Solaris OS Version 7 (a.k.a. Solaris 2.7, SunOS 5.7)
•
Web Browser supporting Java Plug-In:
•
Netscape Navigator 4.76 or later
•
Java plug-In 1.3.0_01 or later
•
HP OpenView Network Node Manager 6.1 (optional)
1.3 HP-UX Platform Requirements
1.3.1 HP-UX Minimum Hardware Requirements
•
HP 9000 workstation, Series 700 or 800
•
128MB RAM (256MB is recommended)
•
200MB free disk space for application space
•
300MB free disk space of tmp space during the installation process
•
CD-ROM Drive
1.3.2 HP-UX Minimum Software Requirements
•
HP-UX version 11.0
•
Web Browser supporting Java Plug-In:
•
Netscape Navigator 4.75
•
Java plug-In 1.3.0
•
HP OpenView Network Node Manager 6.1 (optional)
1.4 SNMP Agent Requirements
The IP address of the server on which the CanogaView Smart Element Manager Enterprise
software is installed must be added to the SNMP Agent’s host table for each device that is
to be managed. Additionally, if trap/alarm monitoring is desired, then the appropriate
“access level” and “trap port” must be setup.
The SNMP Agents currently supported are:
• Domain Management Module (DMM) for management support of the Universal
Chassis System (up to eight 2U and 5U chassis per DMM) and its components.
• 9135 Two Port EdgeAccess™ Switch - 100BASE-TX/FX Compliant Fast Ethernet
device with the SNMP Management Module.
• 9140 Four Port EdgeAccess™ Switch - 100BASE-TX/FX Compliant Fast Ethernet
device with the SNMP Management Module.
• 9135G Gigabit Two-port EdgeAccess™ Switch is a IEEE compliant Ethernet device
with SNMP Management Module.
• 9135E 10/100/1000 MBPS Two-port EdgeAccess™ Switch is a 1000BASE-LX
compliant Ethernet device with SNMP Management Module.
• UCS 1020 one slot enclosure to provide SNMP Management access to any Canoga
Perkins fully manageable 2U Module (L311, L321, L331, L351, 2346, 2446, …)