CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 38)

CanogaView ® Smart Element Manager
32 Enterprise Version
3.2 Getting Started
Once CanogaView Smart Element Manager is installed you are ready to start using it to
manage your Canoga Perkin’s Networking equipment.
3.2.1 Opening CanogaView Smart Element Manager
From Windows
On a Windows platform, a shortcut to the CanogaView Start Page was installed at the
shortcut location selected during the installation process. Locate the shortcut and select or
double click on it.
Figure 3-6. Shortcut Menu
From Unix or Remote Access (Windows or Unix)
The Start Page can be started by entering the IP address and URL of the CanogaView
Smart Element Manager server and web page in the “Address” feature within any web
browser.
The example that follows shows the result of entering the URL http://192.168.1.8:8080/nms
in the “Address” field of IE’s web browser (substitute the IP address of your CanogaView
Smart Element Server for 192.168.1.8 in the example shown). Subsequently, this URL or
any other URL within CanogaView Smart Element Manager can be saved as a “Favorite” for
future access so long as the SNMP Agent or the addresses of any of the components have
not changed.
Note: the DNS host name could be used in place of the IP address. Also, the text in
this URL is case sensitive.