CANOGA PERKINS 8829 UTP-to-Fiber Optic Media Converter - Manual (Page 18)

Canoga Perkins 8829 Media Converter
18
that a Link Loss condition will be sensed on the
UTP port to which the 8829 Media Converter is
connected. This can then be sensed and reported
by a Network Management agent in the remote
UTP port's host equipment.
Because this feature completely disables the UTP
Link, it also disables sensing of the received Link
Test Pulse by the 8829 Media Converter , and thus
the T/INF LED will also turn off.
For this reason, it is important to realize that the
T/INF LED will not come on immediately when
the UTP cable is connected, unless the Receive
Fiber has first been connected and a good link
(F/INF) has been detected on it.