BendixKing KAP 140 - Manual (Page 23)

KAP 140 AUTOPILOT SYSTEM
Single Axis Operation
15
Rev. 1
Apr/02
4. Heading Selector Knob -
ROTATE BUG to agree with OBS
course.
Note Instruments: CDI needle to left.
Intercept heading 45° to the left of
selected (heading bug) course.
5. If the Course Deviation Bar is
greater than 2 to 3 dots: the
autopilot will annunciate NAV
ARM; when the computed capture
point is reached the ARM annun-
ciator will go out and the selected
course will be automatically cap-
tured and tracked. If the D-Bar is
less than 2 to 3 dots: the HDG
mode will disengage upon select-
ing NAV mode; the NAV annunci-
ator will illuminate and the capture/
track sequence will automatically
begin.