Sangean PR-D8 (R3) - Manual (Page 8)

7
Using the Supplied AC Power Adapter
The supplied AC adapter is 9 Volts DC output 700 mA center pin
positive.
1.
2.
The AC adapter should be disconnected from the main AC outlet, when
the radio is not in used.
Setting the Clock
1.
2.
3.
4.
5.
6.
Insert the AC power adapter plug into the DC-In jack on the left hand
side of the radio.
Plug in the AC power adapter into a standard 13A main socket outlet.
Whenever the AC power adapter is plugged in to the radio and to
the main AC outlet, the batteries are automatically disabled.
Clock can be set in both ways; radio power must be on or off.
The display will show “- : - -“ when the batteries are installed or when
the radio is plugged in to a main AC outlet.
Press and hold the time set button until LCD flashes the time set
symbol and also the year digit followed by a beep.
Press tuning up/down button to set required year.
Follow the above procedure step to set the month, date, hour and
minute.
LCD display will stop flashing and will display the real time when it’s
completed.