Sangean PR-D8 (R3) - Manual (Page 25)

24
Recording
1.
2.
3.
4.
5.
6.
GB
Select the desired source for the recording (MW/FM/AUX/SD –
Microphone) by pressing the band button. Set the volume to the re-
quired listening level (the volume of the recording will not be affected
by this).
Insert the SD card.
Select recording bits rate by pressing menu button, the display will
show Record Setup. Press and release Play/Pause button to select
REC quality (initial setting at 128 kbps). Press the button to
select between 64k/128k/192k and confirm the setting by pressing
Play/Pause button.
Press the RECORD button until the display will show “reading“.
Press Play/Pause button to start recording. The display will flash
while recording and the record button will appear in red showing that
it is recording.
To stop recording, press STOP button, the display will show “sav-
ing“ and then “reading“ followed by the file and folder number indi-
cating the recording file is saved as RECORD folder on the SD card.