Sangean PR-D8 (R3) - Manual (Page 12)

11
a. Setting Radio Alarm Time
1.
2.
3.
4.
5.
6.
7.
8.
Note:
If the new radio alarm station is not selected. It will select the last pro-
grammed alarm station.
The radio alarm can be set in both ways (radio on or off).
Press and release radio alarm button , the radio will show radio
alarm symbol.
Press and hold button for more than 2 seconds followed by a
beep.
Display hour will flash, using tuning up/down button to select hour
then press button again to confirm hour setting.
Follow same procedures of setting hour to set required minute. Press
button again to complete the alarm time setting.
During the radio alarm time setting, the display will also flash the last
tuned radio frequency. Press tuning up/down button to select required
wake up radio station or simply press preset station button to select
wave up station.
Press button again to complete radio alarm setting.
Press and hold radio alarm button for 2 seconds to cancel the
radio alarm. Display radio alarm symbol will disappear followed with
a beep.