Sangean PR-D8 (R3) - Manual (Page 14)

13
Snooze Function
1.
2.
Sleep Function
The sleep timer will automatically turn the radio off after a preset time
has elapsed.
1.
2.
Display Backlight
Press any buttons and the LCD display will illuminate for approximately
7 seconds. During scanning the station and the alarm is activated it will
also automatically illuminate the display. Another option is you can also
set LCD brightness by pressing and releasing the button to select
bright, brighter, brightest and off.
While the alarm is active, press any buttons except the power button
to activate the snooze function. The radio or HWS buzzer alarm will
be silenced with interval of 5 minutes.
The display will flash both the snooze symbol and the alarm
symbol. The snooze function can be repeated during the one hour
that the alarms are active.
Press and continue to hold down the power button for more than 2
seconds, followed by a beep, the display will cycle through the avail-
able sleep timers in the order of 60-45-30-15-120-90-60. Release
the power button when the required sleep timer appears in the
display. The symbol will appear in the display and the radio will
play the last station selected.
To cancel the sleep function, simply press the power button.
The symbol will disappear and radio will shut off.