Sangean PR-D8 (R3) - Manual (Page 30)

29
Trouble shooting/Reset Button
If the radio fails to operate correctly or some digits on the display are
missing or incomplete, perform the RESET procedure.
1.
2.
Care and Maintenance
Do not allow this radio to be exposed to water, stream or sand. Do not
leave the radio where there’s excessive heat, which it could cause
damage such as in a parked car.
Technical Information
Power Source:
Ac Power Adapter:
DC 9V 0.7A, center pin positive, diameter of center tip 2.2
Battery:
4 x UM-2(C size, LR14), Alkaline or Ni-MH rechargeable battery
Turn the radio off and remove the batteries.
With the aid of a suitable implement (the end of a paper clip or a
pen), press the RESET button located inside the battery compart-
ment for at least 1 second, this will reset the microprocessor, clock
time and clear all stations stored in the preset memory.