FaxBack Mediant 1000 Appliance - Installation Guide User Manual
Page 15
AudioCodes Mediant 1000 Installation Guide — Page 15
Click Next when it becomes available.
Setup will now ask you for a Called Subscriber Identification (CSID). A CSID is how your fax server will identify itself to other
fax devices. It is also typically printed at the very top of all faxes it sends out. It may be set to anything. Most users will set this to
their fax number or their company name.
Setup will also give you the option to specify a digit to get an outbound line. For example, if calls go through a PBX phone
system that requires a “9” to get an outside line. For more advanced dialing rules, please see the Administration guide about the
Validation Editor.
Click Next.
You will now see a list of all detected ports. You will be given the option of configuring certain ports for inbound faxes only or
outbound faxes only. It is generally fine to allow all ports to send and receive.