Clarion DXZ768RMP - Manual (Page 32)

32
DXZ768RMP
280-8334-00
English
Digital Radio / DAB Operations
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [SRC] button to select the DAB
mode.
2. Press the [BND] button to select any one
shown above.
3. Press the [ å , ∂ ] lever upward or
downward to select a desired programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1. Press the [SRC] button to select the DAB mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
• Press and hold the [DIRECT] button for 2
seconds or longer to store the programme
currently being received. (Manual memory)
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
∗ The factory default setting is “ON”
∗ If the reception of the current broadcast station
deteriorates, “SEARCHING” appears in the
display and the radio searches for the same
programme on another frequency.
∗ For details on “AF function”, refer to the section
“RDS Operation” of each owner’s manual.
● Switching OFF the AF function
● Switching ON the AF function
● AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode. Traffic
programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received
has traffic announcement programmes.
∗ For details on “TA”, refer to the section “ RDS
Operation” of each owner’s manual.
● Setting the TA standby mode
● Cancelling the TA standby mode
● Searching for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP
broadcast is transmitted from an RDS station. In
this case, press the [TA] button to perform TP
seek tuning. Press the [TA] button again to return
to the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
● Setting the INFO standby mode
If you press and hold the [TA] button for 1
second or longer, “INFO” lights in the display
and the main unit is set into the INFO standby
mode until the selected announcement is
broadcast. When the selected announcement
broadcast starts, the announcement item
appears in the display. If you press and hold the
[TA] button for 1 second or longer while the
selected announcement broadcast is being
received, the selected announcement broadcast
reception is cancelled and the main unit goes
into the INFO standby mode.
● Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer or
press the [SRC] button.