Clarion DXZ768RMP - Manual (Page 26)

26
DXZ768RMP
280-8334-00
English
Operations Common to Each Mode
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “ TEL-SWITCH”.
3-1. Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes in the following
order:
“OFF” ➜ “ON” ➜ “MUTE” ➜ “OFF”...
• OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
• MUTE:
The sound from this unit is muted during
telephone calls.
● Setting the auto-volume function
(CALIBRATE/A-VOL SENS)
You can automatically change the volume to
match your car's speed.
∗ The factory default setting is “LOW”.
2-1. Select “ CALIBRATE”.
2-2. Press the [ ] button.
2-3. Accelerate to a speed of 50 km.
2-4. When you reach 50 km, press [ ] button.
Calibration is executed.
• When calibration succeeded
After 2 seconds or longer, “SUCCESSFUL”
will appear on the display.
• When calibration failed
After 2 seconds or longer, “FAILED” will
appear on the display. Repeat the
procedure from step 2-3.
2-5. Next, adjust the sensitivity. Press the [ å ,
∂ ] lever upward or downward to select
“ A-VOL SENS”.
3-1. Turn the [ROTARY] knob to select the
sensitivity.
● Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “ AMP CANCEL”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
● Selecting AUX/TEL
You can listen to sounds and music from
external devices or your telephone calls from
the speakers when connected to this unit.
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is “AUX”.
2-1. Select “ AUX/TEL”.
3-1. Turn the [ROTARY] knob to select “AUX” or
“TEL”.
• AUX :
AUX/TEL input cable is for external Audio
input.
• TEL :
AUX/TEL input cable is for cellular phone
audio input.
● Adjusting the auxiliary input
sensitivity
Adjust the auxiliary sensitivity when the audio
from an external device is difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
2-1. Select “ AUX SENS”.
3-1. Turn the [ROTARY] knob to select from
“LOW”, “ MID” or “ HIGH”.
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select “ TEL SPEAKER”.
3-1. Turn the [ROTARY] knob to select “RIGHT”
or “LEFT”.
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.