Clarion DXZ768RMP - Manual (Page 19)

280-8334-00
DXZ768RMP
19
English
RDS Operations
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations into
preset memory. If the number of TP can be received
less than 6, broadcast stations already stored in
memory and left without being overwritten.
As “TA” lit in the display, press and hold the
[
] button for 2 seconds or longer. The TP
stations with the good reception sensitivity are
stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
∗ The factory default setting is “OFF“.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
● Setting/Cancelling the PTY standby mode
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjust mode.
2. Press the [ å , ∂ ] lever upward or
downward to select “ PTY”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
∗ You cannot select “ON” or “ OFF” during a TA,
ALARM or PTY interrupt.
● ON:
“PTY” is lit in the display and the PTY
standby mode turns on.
● OFF:
“PTY” goes off in the display and the PTY
standby mode turns off.
4. Press the [ADJ] button to return to the
previous mode.
● Cancelling a PTY interrupt broadcast
Press the [TA] button or [SRC] button during the
PTY broadcast, the PTY interrupt is cancelled
and the unit returns to PTY standby mode.
Selecting PTY
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjust mode.
2. Press the [ å , ∂ ] lever upward or
downward to select “ PTY SELECT”.
∗ You cannot select “ PTY SELECT” during a
TA, ALARM or PTY interrupt.
3. Press the [ ] button to go to the PTY
select mode.
4. Press any one of the [DIRECT] buttons.
Alternatively, Turning the [ROTARY] knob to
select the desired PTY.
∗ Below are the factory default settings stored
for the [DIRECT] buttons.
PTY item
ENGLISH Contents
1 News News
2 Info Information
3 Pop M Pop Music
4 Sport Sport
5 Classics Serious Classical Music
6 Easy M Easy Listening Music
Preset
number
5. The PTY select mode is cancelled
automatically and returns to the RDS adjust
mode 7 seconds after a PTY is selected.
PTY seek
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjust mode.
2. Press the [ å , ∂ ] lever upward or
downward to select “ PTY SELECT”.
3. Press the [ ] button to go to the PTY
select mode.
4. Select PTY.
5. Press the [ å , ∂ ] lever upward or
downward. If you move the lever up, the unit
seeks a PTY broadcast moving up the
frequencies; if you move the lever down, it
seeks moving down the frequencies.
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the
previous mode.