Clarion DXZ768RMP - Manual (Page 24)

24
DXZ768RMP
280-8334-00
English
● Turning the screen saver function on
or off
This unit features various screen saver patterns
that are exhibited across the display. If the
screen savers are not desired, they can be
turned off.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “DEMO”.
2-1. Select “ SCRN SAVER”.
2-2. Press the [ ] button.
3-1. Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes in the following
order:
OFF
➜ MSG INFO ➜ DEMO
● Entering MESSAGE INFORMATION
When “MESSAGE” is selected for the screen
saver setting, you can change the contents of
the message.
∗ Up to 30 characters can be entered.
∗ The factory default setting is “Welcome to Clarion”.
2-1. Select “ MSG INPUT”.
2-2. Press the [ ] button.
2-3. Press the [ å , ∂ ] lever upward or
downward to move the cursor.
2-4. Press the [BND] button to select a
character. Each time you press the [BND]
button, the character changes in the
following orders:
Capital letters ➜ Small letters ➜
Numbers and Symbols ➜ Umlaut ➜
Capital letters…
3-1. Turn the [ROTARY] knob to select the
desired character.
3-2. Repeat steps 2-3 to 3-1 to enter up to 30
characters for message.
3-3. Press and hold the [ ] button for 2
seconds or longer to store the message in
memory and return to the display adjust
mode.
∗ Press and hold the [BND] button for 1
second or longer to delete the message.
Then press and hold the [
] button for 2
seconds or longer to return the message to
the default setting.
To change display setting
1. Press and hold the [D] button for 1 second
or longer to switch to the adjustment
selection display.
2. Press the [ å , ∂ ] lever upward or
downward to select the “item name”.
“ BGV” ↔ “ POWER MSG” ↔ “
SCRN SAVER” ↔ “ MSG INPUT” ↔ “
AUTO SCRL” ↔ “ DIMMER” ↔ “
DIMMER IN”
∗ When is displayed, press the
[ ] button to advance to the next operation
step.
3. Turn the [ROTARY] knob to select the
“desired setting value”.
∗ After completing settings, press the [D]
button to return to the previous mode.
● Setting the background vision
This function allows you to change the
background vision in the display.
∗ The factory default setting is “SCAN”.
2-1. Select “ BGV”.
3-1. Turn the [ROTARY] knob to select the
setting.
Each time you turn the [ROTARY] knob,
the setting changes in the following order:
“SCAN” ↔ “MOVIE 1” ↔ “MOVIE 2” ↔
“MOVIE 3” ↔ “WALL 1” ↔ “WALL 2” ↔
“WALL 3” ↔ “WALL 4” ↔ “WALL 5” ↔
“OFF”
● Setting the power message
You can set the power message “ON” or
“OFF”. The message is “Clarion”.
∗ The factory default setting is “ON”.
2-1. Select “ POWER MSG”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
• ON:
When the power is on or off, the message
will appear in the display.
• OFF:
When the power is on or off, the message
won't appear in the display.
Operations Common to Each Mode