Clarion DXZ768RMP - Manual (Page 31)

280-8334-00
DXZ768RMP
31
English
TV Operations
Digital Radio / DAB Operations
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH923) (sold separately), all
functions can be operated.
Listening to the DAB station
1. Press the [SRC] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching the display
1. Each time you press the [T] button, the
display switches in the following order:
S-LABEL PTY NAME
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [SRC] button to select the DAB mode.
2. Press the [ å , ∂ ] lever upward or
downward and hold in position for 1 second
or longer.
“DAB” lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting depends on the TV.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [ å , ∂ ] lever upward or
downward to select “TV DIVER”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
Sets the diver setting to ON.
● OFF:
Sets the diver setting to OFF.
4. Press the [ADJ] button to return to the
previous mode.
Manual tuning
1. Press the [SRC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1
second or longer. “MANU” lights up in the
display.
3. Press the [ å , ∂ ] lever upward or
downward to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Switching programmes
1. Press the [SRC] button to receive a DAB station.
2. Press the [ å , ∂ ] lever upward or
downward to switch programmes in the DAB
station.
Note:
• The programme name may be the same
depending on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [SRC] button to receive a DAB station.
2. Perform the following operation depending
on the connected model.
Press the [ ] button. “SERVICE SCAN”
lights up and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [ ] button.